FOSSER MZ 80W-90 GL-5

Litre

1 litre, 4 litre, 20 litre, 60 litre, 208 litre


Description

FOSSER MZ 80W-90 GL-5 is made from carefully chosen base oils and additives. The EP additives in the product form a load-bearing lubricant film on the tooth flanks that prevent fretting even under extreme mechanical load and significantly reduce abrasion. The gear oil is extremely aging resistant, even under high thermal load. The good low-temperature viscosity is achieved through the high degree of refinery of the base oil and the added flow improver. The gear oil contains highly effective active agents that suppress foaming and protect the lubricated machine parts against damage from corrosion. FOSSER MZ 80W-90 GL-5 does not cause damage to conventional sealing materials


FOSSER MZ 80W-90 GL-5 is recommended for gear systems with hypoid and bevel gears used in axle drive systems in passenger and commercial vehicles. It is also widely used in motorbike universal drive systems and manual gearboxes, unless the use of an engine oil is prescribed.


Specifications:

  • API GL-5 • MIL-L-2105 C/D

Recommendations*:

  • MB 235.0
  • MAN 342 type M-1
  • Ford SQM-2C-9002 AA
  • ZF TE-ML 16C/17B/19B/21A
  • Voith 3.325-339
  • Volvo 97310
  • DAF

* meets the requirements of the OEM manufacturer


TYPICAL VALUES METHOD UNIT FOSSER MZ 80W-90 GL-5
SAE class DIN 51511 - 80W-90
Density at 15°C DIN 51 757 g/cm3 0.897
Viscosity at -12°C DIN 51 398 mm2/s -
Viscosity at -26°C DIN 51 398 mm2/s 130.000
Viscosity at 40°C DIN ISO 3104 mm2/s 140
Viscosity at 100°C DIN ISO 3104 mm2/s 13,9
Viscosity index (VI) DIN ISO 2909 - 98
COC flash point DIN ISO 2592 °C 210
Pour point DIN ISO 3016 °C -30
FZG test A/8.3/90 DIN 51 354 SKS >12
The above values may vary within commercially accepted tolerances

Make An Order